Honda XL1000 Varadero (03 to 11) EBC Clutch Kits
(ebc-ck-honda-xl1000)
Honda XL1000 Varadero (2003 to 2011) EBC Replacement Clutch Plates, steel plates, springs and clutch holding tool
Listed below are the EBC replacement plates, springs and tools that EBC specify for your motorcycle; select the clutch parts you wish to purchase.
Standard CK Standard Series Clutch Friction Plates (8 Plate Kit)
Almost identical to original equipment clutch plates the CK series are a cork based product impregnated with aluminium particles to increase wear life and heat resistance. Material is highly compressed to avoid swell and clutch drag and is an ideal general purpose replacement material for all grades and sizes of motorcycle.
Kit includes a complete engine set of friction plates only
Spring Kits
Always fit new springs which get tired after miles of heat and use. EBC spring kits are 10% stiffer than standard and are sold in engine sets.
Please note : the lever will feel slightly 'heavier' when uprating springs, test ride to acquaint yourself with this change in control
DRC Series Clutch Set
EBC DRC Clutch sets are a complete set of CK series heavy duty cork based lined plates plus heavy duty clutch springs and steel separator plates. Many off road machines are fitted from new with alloy separator plates which wear out quickly and cause clutch to slip. To prevent this, EBCs DRC clutch kit uses steel separator plates to re-establish the original clutch stack height.
Kit Includes : CK Series Friction Plates, Steel Separator Plates and Heavy Duty Clutch Springs
EBC Clutch Installation and removal tool
Made in the UK by EBC Brakes these laser cut clutch tools make clutch removal, loosening of the drive shaft bolts and re tightening a breeze without any fear of damage to your expensive clutch basket. Do not use tyre levers or screwdrivers for this job as expensive damage can result.The tools can even be extended to create more leverage if required with any simple workshop tool or simple tube but the tools themselves are an essential and very low cost item for clutch replacement. EBC strongly recommends the use of these tools for all clutch work and compared to the high prices of manufacturers tools these are very much value for money and a worthwhile buy.
Honda XL1000 Varadero EBC Clutch model applications:-
Honda XL 1000 Varadero (Non ABS Model) :- 2003 - V3, 2004 - V4, 2005 - V5, 2006 - V6, 2007 - V7, 2008 - V8, 2009 - V9, 2010 - VA, 2011 - VB
Honda XL 1000 Varadero (ABS Model) :- 2004 - VA4, 2005 - VA5, 2006 - VA6, 2007 - VA7, 2008 - VA8, 2009 - VA9, 2010 - VAA, 2011 - VAB
Please Note:-
EBC Clutches are all a non stock items, delivery is usually between 3 - 7 days, depending upon the day the order is placed.
Please note that the pictures on this site are for illustrative purposes only and do not necessarily indicate the item being sold.
